S.No |
Department / Centre |
1. |
|
2. |
|
3. |
|
4. |
|
5. |
|
6. |
|
7. |
|
8. |
|
9. |
|
10. |
|
11. |
|
12. |
|
13. |
|
14. |
|
15. |
|
16. |
|
17. |
|
18. |
|
19. |
|
20. |
|
21. |
|
22. |
|
23. |
DEPARTMENT OF CIVIL ENGINEERING
I. FACILITIES AVAILABLE |
1. Materials & Structures Laboratory |
|
2. Concrete Laboratory |
|
3. Environmental Engineering Laboratory |
|
4. Soil Mechanics Laboratory |
|
|
6. Survey Laboratory |
|
7. Computer Applications Laboratory (Softwares) |
|
8. Geographic Information System Laboratory |
|
Softwares
Arcview, Arcview spatial analyst, Arcview network analyst, DAK, R2V, Erdas Imagine, Leica GPS, GS5, Intergraph Geomedia Professional, AUTOCAD map, Microstation Geographics. |
II. AREAS OF CONSULTANCY, TESTING & RESEARCH AVAILABLE |
S.No. |
Activity |
1.
|
Finite Element Analysis and Design of Structures and Rehabilitation of Structures |
2.
|
Quality Control tests on Building Materials |
3.
|
Soil Investigation (Field and Laboratory tests) Foundation Design and Consultancy |
4.
|
Survey of Land using ATS, Preparation of Contour Maps and other associated Investigations. Digitization of Maps and GIS Analaysis, GPS Surveying |
5.
|
Rock Identification, Moh Hardness Test, Ground Water Investigations by electrical resistivity. Survey to Digitisation of maps and GIS analysis satellite image processing, GPS surveying |
6.
|
Water analysis, Sewer design, EIA Consultancy |
DEPARTMENT OF MECHANICAL ENGINEERING
I. FACILITIES AVAILABLE |
1. Heat Power Laboratory |
|
2. Fluid Machinery Laboratory |
Jet pump, submersible pump and various other kind of pumps; Turbines, flow meters, rectangular and triangular notches, cryogenic treatment apparatus, water current meter |
3. Design Laboratory |
|
4. Automation Laboratory |
|
- Anemometer for Airflow Measurement with RS 232 facility;
- Hot wire anemometer
- Data Acquisition Card PCI 6025E
- Pocket Digital Manometer (Multiscale Pressure Meter)
- National Instruments-Sound and Vibration Tool kit with IEPE accelerometer pick up
- 10 kgf Electro Dynamic Vibration Shaker System
- Air Flow Sensor - Differential pressure type
- Surface roughness measurement using Surfcoder
- Load cell for force measurement (0-50kgf)
- LVDT (to measure displacement of piston) of 0-25 mm with Digital Indicator 3.5 digit
- Non Contact type of Temperature measurement system
6. Dynamics Laboratory |
|
7. Laser Laboratory |
|
8. Industrial Engineering Laboratory |
|
|
10. Near Net-Shape Manufacturing Laboratory |
|
II. AREAS OF CONSULTANCY, TESTING & RESEARCH AVAILABLE |
Sl. No |
Activity |
1. |
Heat Power
Laboratory
|
2. |
Fluid Machinery
Laboratory
|
3. |
Design Laboratory
|
4. |
Automation
Laboratory
|
5. |
Sensor-Actuator
Interface Laboratory
|
6. |
Dynamics
Laboratory
|
7. |
Laser Laboratory
|
8. |
Industrial
Engineering Laboratory
|
9. |
Machine Tool
Laboratory
|
10. |
Near Net-Shape
Manufacturing Laboratory
|
DEPARTMENT OF PRODUCTION ENGINEERING
I. FACILITIES AVAILABLE |
|
II. AREAS OF CONSULTANCY, TESTING & RESEARCH AVAILABLE |
S.No. |
Activity |
1. |
Measurement of fluid viscosity by using Brookfield viscometer (Viscosity Range 15 cp- 1 Million cp) |
2. |
Ultrasonic welding - Welding on Thermoplastics (1500 Watts,20,000 Hz) |
3. |
Ultrasonicator (Sonics Vibra cell) for deflocculating the solid particles in a carrier to prepare suspensions/colloids |
DEPARTMENT OF AUTOMOBILE ENGINEERING
I. FACILITIES AVAILABLE |
|
II. AREAS OF CONSULTANCY, TESTING & RESEARCH AVAILABLE |
S.No. |
Activity |
1. |
Performance Testing of IC Engines |
2. |
Endurance Testing of IC Engines |
3. |
Suspension System Design for Twin Axle Vehicles |
4. |
Braking System Design for Twin Axle Vehicles |
DEPARTMENT OF ENERGY ENGINEERING
I. FACILITIES AVAILABLE |
|
II. AREAS OF CONSULTANCY, TESTING & RESEARCH AVAILABLE |
S.No. |
Activity |
1. |
Energy/ Environment / Water audit |
2. |
Energy Modelling |
3. |
Renewable Energy Utilization |
4. |
CFD Simulation |
5. |
Thermal Equipment Design |
DEPARTMENT OF METALLURGICAL ENGINEERING
I. FACILITIES AVAILABLE |
S.No. |
Facilities |
Applications |
1.Metallography | ||
|
Scanning Electron Microscope with EDAX Attachment JEOL, Japan-JSM 6360 | Upto 75000 X Magnification; 70 Angstroms resolution. For study. of fractured samples, powder samples corrosion studies. Useful in failure investigations |
Image Analysis System | Super sophisticated computer oriented Metallograph, for quantitative study of grain size, shape, inclusion ratings, porosity and phase analysis | |
Carl Zeiss Gottingen Microscope | Optical Microscope with digital camera | |
Neophot-2 Metallograph | Versatile metallograph with photographic facilities and micro-hardness test attachment | |
2. Hardness Testing | ||
|
Zwick Microhardness Tester | Load range 10 gm to 30 kg - microprocessor based with printer |
Mitutoyo Microhardness Tester | Load ranges 10 gm to 2 kg with a TV projection system. Usefulfor testing microhardness of metals, phases, inclusions,precipitates | |
Hardness Testers | Brinell Hardness Tester Digital Rockwell Hardness Tester | |
Impact Hardness Tester | Rebound hardness testing of metallic materials | |
3. Non-Destructive Testing | ||
|
X-Ray Radiography Unit | 300 kV - 6 mA Radiography unit; suitable for radiographic testing of industrial components of size upto 75 mm steel (or 200 mm Aluminium) |
Ultrasonic Tester | Ultrasonic Flaw Detector for studying internal defects of metals non-destructively. No limitation with respect to dimensions. | |
Eddy Current Tester | Dual phase eddy current tester for studying surface and sub-surface defects in metals | |
Industrial Endoscopy Unit | Fibre optic technique for visually studying inaccessible regions of components for the presence of defects | |
Magnetic Crack Detector | To study surface and sub-surface cracks in magnetic materials | |
4. Tension and Impact Testing | ||
|
Microtek Tensometer | Used for stress strain curve determination, tension, compression and bend tests, for loads upto 2 tons, for small specimens |
Universal Testing Machine | 40 kN capacity for evaluation of tensile properties | |
Charpy impact testing Machine | Impact testing of specimens at room temp and upto -196 degree centigrade | |
5. Wear Testing | ||
|
Abrasion Testers | Wet type and dry type for studying abrasive wear |
Pin-on-disc Wear Tester | For evaluation of wear characteristics of materials | |
6. Corrosion Testing | ||
|
Stress Corrosion Tester | For studying stress corrosion damage |
IGC Set up | For corrosion studies as per ASTM & EN standards | |
Potentiostat Salt-Spray Chamber | For corrosion testing of metallic samples under acidic and alkaline conditions For corrosion testing of painted and coated components | |
7. Other Facilities | ||
|
Shimadzu X-Ray Diffractometer Model XRD600 | To study crystal structure, phase analysis and transformations in solid metallic samples and powder samples |
Foundry Sand Testing | For testing the properties of moulding sands | |
Heat Treatment Furnances | Various muffle furnaces with programmers and controllers for trial heat treatment work | |
Plasma Spray Deposition | Used to deposit ceramic and metallic powders using a high temperature plasma arc, for various surface engineering applications | |
Attritor | For mechanical alloying of powders for producing power metallurgy components | |
Glove Box | For metal powder conditioning for powder metallurgy studies | |
Hot Isostatic Press | Compaction of specimens at 1500°C and 2000 Bar pressure | |
Vacuum Diffusion Bonding Set-up | For bonding similar and dissimilar materials | |
Hydraulic Press | 700 kN capacity for metal forming and powder compaction | |
Implant Tester | For studying weldability |
II. AREAS OF CONSULTANCY, TESTING & RESEARCH AVAILABLE
Sl.No |
Activity |
1. Failure Analysis | |
|
|
2. Metallography | |
|
|
3. Mechanical Testing | |
|
|
4. Non-destructive Testing | |
|
|
5. Corrosion Testing | |
|
|
6. X ray Diffraction Investigations | |
|
|
7. Fractography Studies and Advanced Metallography | |
|
|
8. Hot Isostatic Pressing | |
(upto 1500o C and 2000 bar
pressure, size 60 mm dia. X 100 mm height) for
|
|
9. Materials Development and Modifications | |
|
|
10. Consultancy Services on: | |
|
DEPARTMENT OF ELECTRICAL & ELECTRONICS ENGINEERING
I. FACILITIES AVAILABLE |
- Standard AC/DC Indicating meters for calibration
- Digital Gauss meter for magnetic measurements
- Vibration Analyzer
- Harmonic Analyzer
- Eddy current Dynamometer for testing up to 7.5 kW Electric Motors
- Various types of DC and AC Drives
- DSP based Motor Controller Trainer kit with TMS 320C50
- 0.5 Accuracy class Load Manager
- Universal programmer
- AD-3522 Single Channel FFT Analyzer with AD-3522-01 GPIB Interface
- Tektronix make 100 MHz Digital storage Oscilloscope for Transient Measurements.
- Programmable power supply - precision grade with facility to inject harmonics, noise etc.
- Magnetizer for magnetizing permanent magnets
- 30A, 30V regulated DC supply
- DC Voltage source upto 1.0 kV
- AC Voltage source upto 11.0 kV
- AC Current source upto 1.0 kA
- AC Source - 10A/0-100 Hz
II. AREAS OF CONSULTANCY, TESTING & RESEARCH AVAILABLE
S.No. |
Activity |
1. |
Design and Testing of Electric motors |
2. |
Multilingual Computing |
3. |
Embedded System Design |
4. |
Micro controller based system design |
5. |
Circuit Simulation |
6. |
System Design using MAT LAB |
7. |
FPGA based system Design |
8. |
Development of VLSI Testing Algorithms |
9. |
Testing of AC/DC motors |
10. |
Calibration of Analog Indicating meter - AC/DC |
11. |
Design and testing of Current Transformers |
DEPARTMENT OF COMPUTER SCIENCE & ENGINEERING
I. FACILITIES AVAILABLE |
- ORACLE 8i for Database based Application Development
- Power Builder Enterprise Version 6.00, Visual Studio 6.0 for Application development
- Flash, 3D Studio, Gif Animator, Adobe Photoshop 5.5,Direct X 6.00 for Multimedia based software Development
- C, Java, Borland C++ 5.0 for software programming
- Star Office (Sun /Intel) for documentation
- Turbo Analyst Case tool
- Generic Modeling Environment 3.0 for Domain Specific Modeling
- Arc Styler for Modeling pervasive services
- Enterprise Architect 5.0 for Forward and Reverse Engineering of Applications
- Rational Rose for Object Oriented Modeling
- Sun Sparc server, HP Linux Server, Dec-Alpha server, Windows, Oracle and Novel Netware Server
II. AREAS OF CONSULTANCY, TESTING & RESEARCH AVAILABLE
S.No. |
Activity |
1. |
Cluster computing |
2. |
Model Driven software Development |
3. |
Meta modeling Middleware based software development (CORBA/.Net) |
4. |
COTS (Commercial off the shelf) |
5. |
GOTS (Government Off The shelf) |
6. |
ROTS (Research Off The Shelf) |
7. |
NDI (Non Developmental Item/Not Developed In-house) |
8. |
Reuse Code-Source code originally written for some other project. |
9. |
Real time scheduling |
10. |
Multimedia data transfer |
11. |
Open source software development |
12. |
Software development for Embedded/Distributed systems environment / Services |
13. |
Information system Development |
14. |
Software Testing |
15. |
Point of Sales monitoring System |
16. |
Agent based intelligent systems |
DEPARTMENT OF INFORMATION TECHNOLOGY
I. FACILITIES AVAILABLE |
IT Laboratory: |
Windows 2000 Server,IBM AS400 e-series and one hundred and forty workstations completely networked. |
Operating systems: |
Windows 2000 and Red hat Linux. |
Database tools: |
IBM DB2 and Microsoft SQL server 2000. |
Programming languages: |
Borland C++ Builder Enterprise edition, Visual Studio, and Microsoft 2003 .Net Professional. |
Internet Tools: |
JAVA SDK 1.4, IBM Web Sphere Application Server and Visual Age for JAVA. |
Application packages: |
Microsoft Office XP, Microsoft Visio and Mathcad. |
Multimedia tools: |
Adobe Photoshop, Flash MX, and GIF Animator. |
HardwareLaboratory |
The Hardware laboratory is equipped with Microprocessor, Micro controller, Digital Signal Processor kits and necessary interface cards and supporting measuring instruments. |
II. AREAS OF CONSULTANCY, TESTING & RESEARCH AVAILABLE |
S.No. |
Activity |
1. |
PACS (Picture Achieve Communications system) |
2. |
EMR (Electronic Medical Records) |
3. |
Development of customized Software for Small scale industries |
4. |
Management Information Systems |
DEPARTMENT OF ELECTRONICS & COMMUNICATION ENGINEERING
I. FACILITIES AVAILABLE |
1. DSP & Embedded Systems Laboratory |
DSP Kits, MATLAB simulation Tools with Toolboxes, RTOS, Embedded System development Kits, Tasking compilers and In- circuit simulators. (ICE) |
2. VLSI Laboratory |
|
II. AREAS OF CONSULTANCY, TESTING & RESEARCH AVAILABLE |
S.No. |
Activity |
1. |
Design and Development of Biomedical Instruments |
2. |
Image processing Applications in Machine Tools |
3. |
Design and Development of Embedded systems emulators and simulators & compilers |
4. |
Complex impedance measurements for safety for fast feeder reactor using wavelets |
5. |
VLSI design and testing |
6. |
Non destructive Testing of machined products using Texture analysis & wavelets |
DEPARTMENT OF TEXTILE TECHNOLOGY
I. FACILITIES AVAILABLE |
1. Spinning Laboratory |
Fancy Yarn Spinning Machine |
2. Weav ing Laboratory |
Braiding Machine, Dobby and Jacquard Machines |
3. Wet Processing Laboratory |
Jigger Machine, Winch, Laboratory Steamer, Perspiro Meter, Computer Colour Matching System, Computer Colour Matching Cabinet, Padding Mangle, Crock Meter, Soxhlet Heater, Cheese Dyeing Machine |
4. Knitting Laboratory |
|
5. Testing Laboratory |
Kawabata Fabric
Evaluation System Microscope with Camera for Antimicrobial Efficiency Evaluation Projection Microscope |
6. PSG Premier Testing Laboratory |
|
Digitizer and Plotter, Softwares - Modaris, Diamino |
8. Textile CAD Laboratory |
Textronics, Techmen, Adobe Photoshop, Corel Draw |
II. AREAS OF CONSULTANCY, TESTING & RESEARCH AVAILABLE
S.No. |
Activity |
1. |
|
2. |
|
3. |
|
4. |
|
5. |
|
6. |
|
7. |
|
8. |
|
9. |
|
10. |
|
11. |
|
I. FACILITIES AVAILABLE |
|
II. AREAS OF CONSULTANCY, TESTING & RESEARCH AVAILABLE |
S.No. |
Activity |
1. |
Spectral Analysis |
2. |
Filterable Residue Analysis Supplied (Filter from the customer) |
3. |
Bacteriological Analysis of water (BOD, MPN Method) |
4. |
Polymerase Chain Reaction |
5. |
Assay for enzyme activity for food & textile Industry |
6. |
Immunogen modification |
7. |
Process development in fermentation |
I. FACILITIES AVAILABLE |
|
II. AREAS OF CONSULTANCY, TESTING & RESEARCH AVAILABLE |
S.No. |
Activity |
1. |
Analysis of water - Water quality parameters for buildings and (as per IS456) drinking purposes. |
2. |
Analysis of cement and mortor - Cement to sand ratio of mortor and chemical composition of cement. |
3. |
Analysis of polymers, plastics and rubber -Identification, determination of glass transition, melting and crystallization temperatures. |
4. |
Chemical analysis of ores, metals and alloys. |
5. |
Analysis of lubricating oil - Viscosity index, flash and fire points, free acids and saponification value etc. |
6. |
Analysis of textile chemicals and fibres - textile fibre composition in blends, fibre types, dyes and application on textiles. |
7. |
Ion exchange resins - Demineralization of industrial waters. |
8. |
Corrosion testing - Corrosion rate measurements for various metals and alloys in different media by electrochemical polarisation method. |
DEPARTMENT OF MANAGEMENT SCIENCES
I. FACILITIES AVAILABLE |
S.No. |
Facilities |
Applications |
1. |
BehaviouralAssessment Laboratory | To assess the individual potentials in terms of personality, attitude,leadership, team building skills and other competency. |
2. |
Advertising Laboratory | Studio facilities, audio & video recording room and Hardware & software to support editing the short films for developing adver-tisement and documentary films for corporates and institutions. |
3. |
Language Laboratories | Learning Japanese, French languages and Cultural skills.Transcribing the documents in English language from the respective foreign languages. |
II. AREAS OF CONSULTANCY, TESTING & RESEARCH AVAILABLE |
S.No. |
Activity |
|
Research : |
1. |
Strategic Management |
2. |
Human Resource Management |
3. |
Logistics and Supply Chain Management |
4. |
Family Business Management |
6. |
Small Enterprise Management |
7. |
Entrepreneurial Management |
8. |
Regional development through cluster development |
9. |
Technology Management |
|
Consultancy : |
1. |
Competency Mapping |
2. |
Organizational climate and cultural studies |
3. |
Strategic Cost ManagementMarket Research |
4. |
Advertising and Communication |
5. |
Marketing Strategy |
I. FACILITIES AVAILABLE |
General Facilities |
II. AREAS OF CONSULTANCY, TESTING & RESEARCH AVAILABLE |
S.No. |
Activity |
1. |
Conducting surveys for
industries regarding a) Industry expectations from fresh engineering graduates b) Assessing attitudeof the staff towards management polices c) Assessing aptitude of the staff towards their job d) Market analysis and e) Analysing the impact of advertisements |
CAD/CAM CENTRE & VIRTUAL REALITY CENTRE
I. FACILITIES AVAILABLE |
CAD/CAM/CAE/Simulation/Product Data Management (PDM) |
- AutoCAD 2002
- Pro/ENGINEER Wildfire
- Unigraphics NX
- Unigraphics NX Mold Wizard
- CADDS V5.4
- CATIA V4
- CATIA V5
- IDEAS 9.0
- MasterCAM 9.1
- AutoCAST
- WindChill 6.2.6
- AutoDesk Mechanical Desktop 6.0
- Virtual Reality and Division Mockup
II. AREAS OF CONSULTANCY, TESTING & RESEARCH AVAILABLE
S.No. |
Activity |
1. |
Design of Engineering Components, and Consumer Products using CAD Packages (Pro/ENGINEER) |
2. |
Design of Patterns and Core boxes using Pro/ENGINEER-CAST |
3. |
Design of Plastic Molds and Dies using Pro/ENGINEER-MOLD and UG Moldwizard |
4. |
Manufacturing Solutions using CAM Packages |
5. |
Analysis of Engineering Components using ANSYS |
6. |
Analysis of Engineering Components using I-DEAS |
7. |
Supporting for Tool Development in Association with Tifac -Core from Reverse Engineered Data |
8. |
Simulation of Castings using AutoCAST |
9. |
Simulation of Plastic Injection Molding process using MOLDFLOW |
10. |
Data Conversion from 2D to 3D and Legacy to 3D |
11. |
Integrated Product Development using Windchill PDMLink |
12. |
Digital Prototyping using Virtual Reality and DIVISION Mockup for Product Design |
I. FACILITIES AVAILABLE |
- Rapid Prototyping / Rapid Tooling in ABS Plastic using Fused Deposition Modeling - Stratasys FDM Maxum (USA) with Build dimensions 600w x 500b x 600h
- Rapid Prototyping / Rapid Tooling in DuraForm PA & GF, Metal using 3D systems / DTM Selective Laser Sintering SINTERSTATION 2500 plus ( USA) with Build dimensions 381w x 330b x 457h
- Rapid Tooling for Engineering Plastics using MK Technology Vacuum Casting system - I ( Germany) with Build dimensions 440w x 4400b x 370h
- Re - Engineering and Digitizing with Renishaw cyclone ( UK) (Contact / Non contact - Laser scanning) with axis travel 600 x 500 x 370
II. AREAS OF CONSULTANCY, TESTING & RESEARCH AVAILABLE |
S.No. |
Activity |
1. |
Rapid Prototyping / Rapid Tooling for Product Development with Stratasys FDM Maxum (USA) in ABS Plastic material |
2. |
Rapid Prototyping / Rapid Tooling for Product Development with 3D systems / DTM Selective Laser Sintering Sinterstation 2500 plus ( USA) in DuraForm PA & GF and Metal |
3. |
Rapid Tooling development with MK Technology Vacuum Casting system - I ( Germany) for Engineering Plastics |
4. |
Re-Engineering and Digitizing with Renishaw cyclone ( UK)(Contact / Non contact - Laser scanning) - 2D and 3D Scanning |
VIRTUAL INSTRUMENTATION CENTRE
I. FACILITIES AVAILABLE |
Hardware and Software |
- LabVIEW 7.1 Professional Development System
- Data Acquisition (DAQ) Cards with Accessory
- Image Acquisition System
- Motion Control System
- GPIB and Instrument Simulator
- Signal Conditioning Modules (for temperature, strain and acceleration)
- NI Educational Laboratory Virtual Instrumentation Suite (ELVIS)
- LabVIEW DSP Module
- LabVIEW Simulation Module
- LabVIEW Data Logging and Supervisory Control Module
- NI Signal Express
- NI MATRIX
- LabWINDOWS
- Measurement Studio
- DIAdem
- PID Control and Fuzzy Logic Toolset Signal Processing Toolkit
- Model Based Control Design Toolset
- Digital Filter Design Toolkit
- Sound and Vibration Toolkit
II. AREAS OF CONSULTANCY, TESTING & RESEARCH AVAILABLE
S.No. |
Activity |
1. |
Industrial test,
measurement, automation and control with
features such as:
|
PSG L&T CENTRE FOR EXCELLENCE IN LV SWITCHGEAR
I. FACILITIES AVAILABLE |
1. Relays - Under
Voltage Relay, Over current and earth fault relays
2. Thermal overload relay and Multi function
Motor protection relays
3. Control switches and Switch disconnector fuse
4. Contactors with NO and NC relays
5. Moulded case Circuit Breaker and Motor
Protection Circuit Breakers (MPCBs)
6. Air Circuit breaker 800 A and Annunciator
Module
7. COM manager Software with interfacing module
8. kWh meter (static type)
9. Intelligent Panel meter
10. Automatic Power factor Corrector
11. Microcontroller based testing kit
II. AREAS OF CONSULTANCY, TESTING & RESEARCH AVAILABLE |
Sl.No |
Activity |
1. |
Consultancy activities in the field of selection and design of circuits using LV switchgears and other protective devices for specific user segments such as Electricity boards, control panel board builders, sugarcane processing units, textile mills etc. |
2. |
Testing of LV breakers, contactors and relay assemblies. |
3. |
Electrical Design of Switch Board Assemblies and motor control centers |
4. |
Motor Control and Protection |
5. |
Remote assistance and control of various protective devices and fault status information. |
PSG LAPP CENTRE FOR EXCELLENCE IN CABLE TECHNOLOGY
I. FACILITIES AVAILABLE |
1. Cables - Power,
communication, control and fibre optic cables 2. Industrial connectors and cable glands 3. Cable Marking systems 4. Cable handling devices 5. Application unit for cable testing |
II. AREAS OF CONSULTANCY, TESTING & RESEARCH AVAILABLE |
Sl.No |
Activity |
1. |
Selection and testing of cables for wide variety of industries like plant engineering, construction, automotive,instrumentation, electrical engineering, IT, telecommuni- cations, medical electronics, transport, elevators and platforms. |
2. |
Selection and testing of connectors and cable glands for different types of applications involving PVC multi-core cables, control cables, environment friendly control cables, PUR cables, servo cables, robotics cables, fiber opticcables etc. |
3. |
Guidance and consultancy to the industrial engineers and technicians in handling of cables and marking systems as per national and international standards |
4. |
Complete system solutions for design, selection and routing of electrical cables according to international standard. |
5. |
Excellent expertise to undertake consultancy activities in design and implementation of power as well as control circuits for machines and process control applications. |
I. FACILITIES AVAILABLE |
|
II. AREAS OF CONSULTANCY, TESTING & RESEARCH AVAILABLE |
Sl.No |
Activity |
1. |
Networking Solutions (Network Design & Implementation,Server Installation, service & Support). |
2. |
Network monitoring, Security Implementation. |
3. |
Complete Web Solutions (Web hosting, Designing & Development) |
I. FACILITIES AVAILABLE |
1. 12" Thin Film DC / RF
Magnetron Sputtering Unit
2. 12" Thin Film DC Magnetron Sputtering Unit
3. 12" Thin Film Vacuum Coating Unit with Electron
Gun
4. 12" Thin Film Vacuum Coating Unit
5. Nd-YAG Laser (50 mW)
6. He - Ne Laser (2 mW, 5 mW and 10 mW)
7. Argon - Ion Laser, Multiline 450 - 532 nm (200
mW)
8. Laser Power Meters
· 5 nW - 5 W
· 20 mW - 2W
9. UV - VIS Absorption Spectrophotometer
10. Ocean Optic Fibre Spectrophotometer (Reflection
and Transmission)
11. Four Probe Apparatus (to measure resistivity of
semiconductor)
II. AREAS OF CONSULTANCY, TESTING & RESEARCH AVAILABLE |
Sl.No |
Activity |
1. |
Thin films - Optical coatings |
2. |
Thin films - Tribological coatings |
3. |
Thin films - Sensors |
4. |
PC based instrumentation |
PSG-SIEMENS CENTRE OF EXCELLENCE IN AUTOMATON
I. FACILITIES AVAILABLE |
Programmable Logic
Controllers Siemens LOGO Siemens S7200 PLC Siemens S 7300 PLC Keyence PLC GE Fanuc PLC Allen Bradley Micrologix 1000 PLC Allen Bradley Micrologix 1500 PLC Human Machine Interface Siemens OP27 Siemens TD200 Allen Bradley Panel View300 Industrial Networking Equipments
Drives |
Softwares for PLC PLC Step 7 Micro win 32 V4.0 RSLogix 500 (Starter and Standard) Step 7 V5.1
Softwares for
HMI & SCADA Softwares for
Networking |
II. AREAS OF CONSULTANCY, TESTING & RESEARCH AVAILABLE
S.No. |
Activity |
1. |
Machine / Motion control systems |
2. |
Distributed control applications |
3. |
PLC-Development, Implementation & Validation of Logic for all types of machinery and processes |
4. |
SCADA - Control and monitoring solutions for machinery and processes |
5. |
Industrial Networking - implementation of industrial networking with various field bus technologies |
6. |
Sensors - selection and optimization of sensors |
7. |
Drives - selection and optimization of drives |
8. |
Embedded Solutions - Design and development of embedded system for industrial application Trouble shooting of Embedded systems with logic analyzer |